********************************************************************
KONICA MINOLTA Box Operator 3.2.33000
                                                    03/12/2021 Rev.1

Copyright (C) 2005 KONICA MINOLTA, INC.
********************************************************************
This file contains information on using Box Operator.
Be sure to read this file before using the application.

1. Introduction
2. System requirements
3. Supported devices
4. Install/ uninstall guide
5. Version confirmation procedure in the application.
6. Limited functions / known limitations

********************************************************************
1. Introduction
   Box Operator is software that allows you to access scan or box 
   files from a computer on the network and manage the files, 
   such a downloading, deleting or renaming them, as if they were 
   on the computer.

********************************************************************
2. System Requirements
 
  Support OS : 
        Please refer to attached "Appendix1_OS_SupportInfo.txt".
        - Please use the latest version of each operating systems.
        - There may be notes/restrictions depending on your operating systems. 
          Please refer to "6. Limited functions / known limitations" for additional information.

  Network: 
        TCP/IP protocol should be set up correctly.

  Application:
        Adobe Acrobat or Adobe reader 
        Other software required for managing and editing images

********************************************************************
3. Supported devices

Please refer to attached "Appendix2_Device_SupportInfo.txt".
There may be notes/restrictions depending on your  device. 
Please refer to "6. Limited functions / known limitations" for additional information.

********************************************************************
4. Install/uninstall guide

Please refer the user manual.
In addition, Box Operator has different installers for 32bit OS (x86) and 64bit OS (x64).
Please check your Operating System and use an appropriate installer.

********************************************************************
5. Version confirmation procedure in the application.

You can check the version from a running application by the following procedure.
 1. Select [About Box Operator] on the [Box Operator] menu.
 2. The version information is included on the dialog.

********************************************************************
6. Limited functions / known limitations

   Box Operator has the following limitations by the model of MFP
   to connect.
   - Function/Item which MFP to connect does not support
     is grayed out or displays only an item but not details.
     However, even if MFP to connect has no Memory RX User Box Function,
     by setup of a display of a tool / option / system box,
     it is possible to specify "Displays Memory RX User Box".
     But since there is no function in MFP, Memory RX User Box
     cannot be used.

   When connecting with B/W MFP, Box Operator can not display the thumbnails
    of files in user box.

   When PageScope Box Operator version 2.0.x or version 3.0.00000 or version 3.0.00100 is
   installed, please install this version after uninstalling 
   version 2.0.x or version 3.0.00000 or version 3.0.00100.
   Then the settings in version 2.0.x or version 3.0.00000 or version 3.0.00100 will be deleted.
   Please remember the settings before uninstallation.
   
   It may take some time to launch the application. In such a case, please perform the following steps.
   1) Launch Internet Explorer
   2) Open Internet Option under tools menu.
   3) Open Advanced tab and turn off the following setting.
       "Check for server certificate revocation"

  When "User Account Control: Only elevate executables that are signed and validated" is enabled 
  at Local Security Policy of Windows Vista/Server 2008, 
  it is not possible to uninstall program by using "Programs and Features" of Control Panel.
  To uninstall program, disable "User Account Control: Only elevate executables that are signed and validated"
  at Local Security Policy of Windows Vista/Server 2008, or use "setup.exe" which is used at installation of program.

  Regarding Searchable PDF Rotation Correction:
  When the following settings are performed for a document in the MFP used:
   - High level security setting (Encryption for Digital Signature, Digital ID)
   - PDF property settings
  and a Searchable PDF with Rotation Correction is retrieved, there is a
  possibility of image and text position getting changed.

  Depending upon the environment being used, short cut directory to the
  application may remain in the Start menu, after the application has been uninstalled.
  Because of this there should not be any problem in any of the operations.
  If required, please delete it manually.

  When executing Move To Folder/Copy To Folder, length of a path of
  destination/ target device including file name should be less than 256
  (255 or less) one-byte characters or it fails to forward files.
  This is by design of the OS(x86).

  In order to use "Print after merging files" function,
  Adobe Reader or Adobe Acrobat must be specified as the default program to open the PDF.
  Please note that different program is specified as a default for Windows 8.1 / Windows 10.

  When the destination device cannot use box related functions for reasons such as the HDD is not installed , 
  it cannot be connected from Box Operator.

  When PageScope Box Operator version  3.2.25000 is installed,
  please install this version after uninstalling version 3.2.25000
  following the message displayed.

  When installed on Windows 10 and logged in as a "Standard User"
  the Box Operator icon may not appear correctly when the Start Menu is displayed.
  You can continue using the application as it is or
  the issue can be corrected by logging into Windows 10 as an "Administrator" one time.
  The icon will be displayed correctly for all future Standard User logins.

  When using this application combined with the products below,
  the firmware versions available are limited.
  The supported firmware versions are as follows.
   - bizhub C4050i/C3350i: Function Version 2.2 [G00-KD] or earlier
   - bizhub C287i/C257i/C227i: Function Version 2.2 [G00-KD] or earlier
   - bizhub C286i/C266i/C226i: Function Version 2.2 [G00-KD] or earlier
   - bizhub 4750i/4050i: Function Version 2.2 [G00-KD] or earlier
   - bizhub 306i/266i/246i/226i: Function Version 2.2 [G00-KD] or earlier
   - bizhub C750i: Function Version 2.2 [G00-KJ] or earlier
   - bizhub C650i/C550i/C450i: Function Version 2.2 [G00-KJ] or earlier
   - bizhub C360i/C300i/C250i: Function Version 2.2 [G00-KJ] or earlier
   - bizhub 750i: Function Version 2.2 [G00-KJ] or earlier
   - bizhub 650i/550i/450i/360i/300i: Function Version 2.2 [G00-KJ] or earlier

********************************************************************
Windows is a trademark of Microsoft Corporation in the United States
and other countries.
Other company names and product names are trademarks or registered
trademarks of their respective companies.

********************************************************************
LibJPEG Copyright and License Agreement 

In plain English: 

1. We don't promise that this software works.  (But if you find any bugs, please let us know!) 
2. You can use this software for whatever you want.  You don't have to pay us. 
3. You may not pretend that you wrote this software.  If you use it in a program, 
    you must acknowledge somewhere in your documentation that you've used the IJG code. 

In legalese: 

The authors make NO WARRANTY or representation, either express or implied, with respect 
to this software, its quality, accuracy, merchantability, or fitness for a particular purpose.  
This software is provided "AS IS", and you, its user, assume the entire risk as to its quality 
and accuracy. 

This software is copyright (C) 1991-1998, Thomas G. Lane. 

All Rights Reserved except as specified below. 

Permission is hereby granted to use, copy, modify, and distribute this software (or portions 
thereof) for any purpose, without fee, subject to these conditions: 

(1) If any part of the source code for this software is distributed, then this README file must 
be included, with this copyright and no-warranty notice unaltered; and any additions, 
deletions, or changes to the original files must be clearly indicated in accompanying 
documentation. 

(2) If only executable code is distributed, then the accompanying documentation must state 
that "this software is based in part on the work of the Independent JPEG Group". 

(3) Permission for use of this software is granted only if the user accepts full responsibility for 
any undesirable consequences; the authors accept NO LIABILITY for damages of any kind. 

These conditions apply to any software derived from or based on the IJG code, not just to the 
unmodified library.  If you use our work, you ought to acknowledge us. 

Permission is NOT granted for the use of any IJG author's name or company name in 
advertising or publicity relating to this software or products derived from it.  This software 
may be referred to only as "the Independent JPEG Group's software". 

We specifically permit and encourage the use of this software as the basis of commercial 
products, provided that all warranty or liability claims are assumed by the product vendor. 

********************************************************************
 LibTIFF Copyright and License Agreement 
     
Copyright (c) 1988-1997 Sam Leffler and Copyright (c) 1991-1997 Silicon Graphics, Inc. 

Permission to use, copy, modify, distribute, and sell this software and its documentation 
for any purpose is hereby granted without fee, provided that (i) the above copyright 
notices and this permission notice appear in all copies of the software and related 
documentation, and (ii) the names of Sam Leffler and Silicon Graphics may not be used in 
any advertising or publicity relating to the software without the specific, prior written 
permission of Sam Leffler and Silicon Graphics. 
     
THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, EXPRESS, 
IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY WARRANTY OF 
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. 
     
IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR ANY SPECIAL, 
INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, OR ANY DAMAGES 
WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER OR NOT 
ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF LIABILITY, ARISING 
OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.

********************************************************************
Copyright (c) 2006-2018 Arseny Kapoulkine

Permission is hereby granted, free of charge, to any person obtaining a copy of this 
software and associated documentation files (the “Software”), to deal in the Software 
without restriction, including without limitation the rights to use, copy, modify, merge, 
publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons 
to whom the Software is furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all copies or 
substantial portions of the Software.

THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL 
THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR 
OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, 
ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR 
OTHER DEALINGS IN THE SOFTWARE.